Audio track mixing — Settings and quality
Audio track mixing — Settings and quality: Four things shape the mix: each track volume (0 to 1), master volume, mute and solo, and where each clip starts.

Worked example
Four things shape the mix: each track volume (0 to 1), master volume, mute and solo, and where each clip starts.
For speech over music, set the voice track to 1.00 and the music bed between 0.20 and 0.30. The sliders are linear, so 0.50 is about 6 dB quieter, 0.25 about 12 dB and 0.10 about 20 dB. Under 0.20 the music may vanish on a phone speaker; above 0.35 it starts to mask consonants. Raise the music to 0.60 or more only where nobody speaks, such as a 3-second intro.
Leave headroom at the master. Two tracks that each peak near full scale can add up past it and distort, and a 16-bit WAV cannot store the overflow. Setting master volume to around 0.85 costs less than 1.5 dB and removes most of that risk, so try it before you start changing individual tracks.
Position matters as much as level. Start the voice about 2 seconds after the music so listeners hear the bed first, and let the music continue 2 to 3 seconds after the last word. The typical mistake is stretching a 2-minute music clip under a 45-second ad and exporting 2 minutes. Trim the music clip end so the project ends where the ad does.
Any effect you add in the effects rack acts on the whole mix, not a single track, so reserve it for light corrections and hear the result at both a low and a normal volume.
Input
Voice track + music track
Output
Mixed timeline export
There is no automatic ducking, so a long piece may need you to split the music and set different levels for each part.
Choose a specific task 8
Related tools 5
How to use Audio track mixing — Settings and quality
- Choose the media file for Audio track mixing — Settings and quality.
- Select the edit, conversion, or timing option and preview the result.
- Render the output and download it when it is ready.
Quick answers
What does Audio track mixing — Settings and quality do?
Audio track mixing — Settings and quality: Four things shape the mix: each track volume (0 to 1), master volume, mute and solo, and where each clip starts.
How do I use Audio track mixing — Settings and quality?
Choose the media file for Audio track mixing — Settings and quality. Select the edit, conversion, or timing option and preview the result. Render the output and download it when it is ready.
What can I do with the Audio track mixing — Settings and quality result?
The completed media file is available to preview and download; multiple results can be bundled when the tool produces more than one file.
What should I listen for in the exported audio?
Play the beginning, end, and each edited transition in the downloaded file. Check that speech is not cut off, fades sound natural, and louder sections do not distort. Converting a compressed recording to WAV does not restore information already lost. Keep the source and choose an output format accepted by the destination service.
