A 3D printer that runs at 500 mm/s
The Creality K2 SE Combo prints at up to 500 mm/s with 20,000 mm/s² acceleration and a nozzle that reaches 300 ℃. The build volume is 220 × 215 × 245 mm and bed leveling is fully automatic.
Geekbuying
Geekbuying
Gadget store: 3D printers to mini PCs
CODE8%8% off the 3D printer and laser engraver category
- 8% off 3D printers and lasers: CONSUM50
- €5 off €50+ orders with 26SEPS1
- Ships worldwide, 1 to 2 year warranty
The saving is capped at $50.
Get the discount
A 12 W laser engraver with a 360 × 360 mm bed
The Mecpow X3S joins two 7 W diode modules into a 12 W beam with a 0.06 × 0.08 mm spot. It engraves at up to 10,000 mm/min and runs over Wi-Fi or offline.
A compact mini PC with Core Ultra 5
The BMAX B11 Pro pairs an Intel Core Ultra 5 115U with 16 GB of LPDDR5 and a 512 GB NVMe drive, and ships with Windows 11 Pro. HDMI, DisplayPort and USB-C outputs support up to three 4K screens.
A dual-motor 1000 W × 2 electric scooter
The KuKirin G2 Master carries a 52 V 20.8 Ah battery and two 1000 W motors, topping out at 60 km/h in dual-drive mode. Ten-inch off-road tubeless tires and hydraulic suspension front and rear handle rough pavement.
A 7-speed e-bike rated for 90 km
The Touroll B1 combines a 250 W motor, a 36 V 15.6 Ah battery and a 7-speed Shimano derailleur. It has five pedal-assist levels and a stated maximum range of 90 km in assist mode.
A cordless robot cleaner for the pool
The WYBOT A1 cleans the floor for up to 120 minutes per charge and refills in about 2.5 hours. A 180 μm filter plus fine cotton foam traps leaves and sand. It suits flat-bottom pools of 80 to 100 m².
FAQ
What does Geekbuying sell?
It sells consumer electronics across the board: 3D printers and laser engravers, e-scooters and e-bikes, robot and cordless vacuums, mini PCs, tablets and monitors, and portable power stations. The category menu also lists headphones, projectors, security cameras and kitchen appliances.
Which countries can I order from?
The store ships worldwide, and you pick the destination at checkout. The homepage also has separate menus for EU, German, Polish and Czech local warehouses.
What does the CONSUM50 code cover?
CONSUM50 takes 8% off the 3D printer and laser engraver category, capped at $50. Products outside that category are not included.
What order size do the euro codes need?
26SEPS1 needs €50 and takes off €5, 26SEPS2 needs €150 for €10, 26SEPS3 needs €300 for €25 and 26SEPS4 needs €450 for €35. 26BTS03 takes €30 off orders over €350.
What warranty comes with the products?
The homepage mentions a one-to-two-year warranty, EU-based warranty support and dispatch within 24 hours. Terms can differ by product, so check the item page before you buy.
You might also like
Alibaba.com$20 off a first Alibaba.com order of $100 or moreWholesale sourcing with order protection
AliExpress3 items for €5.99 in the app, shipping includedGadgets to home goods, one marketplace
Anker SOLIX CanadaCurrent sale prices on SOLIX power stations, shipped freePortable power stations priced in CAD
ASUS IndiaUp to ₹3,000 instant discount on ASUS notebooks, plus No Cost EMI for up to 12 monthsUp to ₹3,000 off notebooks, No Cost EMI