SCULPFUN S9 Pro 10W Laser Engraver

An open-frame engraver whose 10 W beam-shaping diode laser focuses to 0.06 mm. It engraves a 400 × 410 mm area at 10,000 mm/min, cuts wood and acrylic, and marks ceramics and stainless steel directly.

~~$227.35~~

8%$209.16

Price with code · Geekbuying · as of 2026-10-09

Code CONSUM50 · 8% off

max $50 · until 2027-05-31

Copy code & shop Geekbuying

~~$227.35~~8%$209.16Copy code & shop Geekbuying

110 W, 0.06 mm focus

Beam shaping concentrates 10 W into a 0.06 mm focus that cuts wood, black acrylic, bamboo and fabric and marks ceramics and 304 stainless steel directly. Engraving accuracy is 0.01 mm.

2Focus by sliding

A fixed-focus lens on a slide: lower the laser, tighten the screw and it’s focused. The shield filters 98 % of the laser light to protect your eyes.

3Quick build, expandable frame

The all-metal frame is rigid and goes together in 10–20 minutes. Later you can swap in a new laser or longer beams to grow the work area. LightBurn and LaserGRBL are supported.

Key specs

Laser: 10 W diode · 450 nm
Work area: 400 × 410 mm
Speed: 10,000 mm/min
Focus / accuracy: 0.06 mm / 0.01 mm
Connection: USB
Ships from: EU warehouse

Good pick if

You want an open-frame engraver with a big work area
You want room to upgrade later

Think twice if

Assembly and software setup put you off

FAQ

Is there a promo code?

Yes. Enter CONSUM50 at Geekbuying checkout when buying the SCULPFUN S9 Pro 10W Laser Engraver for 8% off. Conditions: max $50 · until 2027-05-31.

Is it plug-and-play?

Not quite. You install LightBurn or LaserGRBL, then connect and calibrate, which takes about 15 minutes the first time.

What’s in the box?

The X-axis assembly, X and Y shafts, control box, laser module, 12 V 5 A adapter, power and USB cables, belts, screws and tools, goggles, two 10 × 10 cm wood boards and an A4 steel protection pad.