Mintion V1 3D Printer Air Filtration System

A filter box that strips fine particles and odours from a 3D printer through three layers: pre-filter, H13 HEPA and activated carbon. Its centrifugal fan moves up to 60 m³ per hour.

~~$71.78~~

8%$66.04

Price with code · Geekbuying · as of 2026-10-09

Code CONSUM50 · 8% off

max $50 · until 2027-05-31

Copy code & shop Geekbuying

~~$71.78~~8%$66.04Copy code & shop Geekbuying

1Three filter layers

The pre-filter catches dust and lint to protect the HEPA, the H13 HEPA traps ultrafine particles, and activated carbon absorbs VOCs and odours such as styrene and caprolactam. It covers PLA, PETG, ABS, ASA and nylon.

260 m³/h centrifugal fan

A 6000 rpm centrifugal fan pulls up to 60 m³/h with up to 10 m/s at the outlet, running air through every stage without upsetting the print.

3Small body, easy swaps

At 13.5 × 14 × 28 cm it fits inside or beside an enclosure, and modular filters swap quickly. Filter life runs 1–6 months depending on use.

Key specs

Airflow: Up to 60 m³/h
Filters: Pre-filter · H13 HEPA · carbon
Power input: Adapter AC 100–240 V → 24 V DC
Weight: 1.1 kg
Ships from: EU warehouse

Good pick if

You print ABS or ASA in a room or office
You run a small print farm

Think twice if

You only run open-frame printers

FAQ

Is there a promo code?

Yes. Enter CONSUM50 at Geekbuying checkout when buying the Mintion V1 3D Printer Air Filtration System for 8% off. Conditions: max $50 · until 2027-05-31.

What’s in the box?

The V1 with HEPA and carbon pre-installed, a 24 V DC adapter, a sealing cover, screws, a Phillips screwdriver, an L-shaped hex key and a manual.

How loud is it?

About 60 dB at 1 m on full power, and the speed is adjustable to run quieter.