Mecpow P150 150 W Laser Fume Extractor

A 150 W purifier that pulls in and filters smoke from a laser engraver. Pre-filter, HEPA and activated-carbon stages catch 99.97 % of 0.3 μm particles, and it runs at a quiet 50 dB.

~~$216.47~~

8%$199.15

Price with code · Geekbuying · as of 2026-10-09

Code CONSUM50 · 8% off

max $50 · until 2027-05-31

Copy code & shop Geekbuying

~~$216.47~~8%$199.15Copy code & shop Geekbuying

1150 W suction, dial control

A single-phase brushless motor moves 258 m³ an hour. A dial sets the airflow, and metal buckles at the base plus a foam cover on the inlet keep smoke from leaking.

Under the desk, connected to an engraver

299.97 % through three stages

A pre-filter, a medium HEPA and an activated-carbon filter catch smoke, dust and harmful gases in turn. The filter pack comes fitted, with four spare pre-filters.

350 dB, on casters

At 50 dB it stays out of the way. Braked casters and handles make it easy to move, and it pairs with enclosed engravers such as the Mecpow X3, X5 and X4 Pro, Creality Falcon 2 and xTool F1 Ultra, M1, S1 and P2.

Key specs

Suction: 150 W
Airflow: 258 m³/h
Filtration: 0.3 μm · 99.97 %
Noise: 50 dB
Inlet / hose: Ø75 mm · 2 m
Ships from: Poland warehouse

Good pick if

You engrave in a room where venting out a window is hard
You use an enclosed engraver

Think twice if

You’d rather not buy replacement filters

FAQ

Is there a promo code?

Yes. Enter CONSUM50 at Geekbuying checkout when buying the Mecpow P150 150 W Laser Fume Extractor for 8% off. Conditions: max $50 · until 2027-05-31.

Does it work with open-frame engravers?

It connects to the Mecpow X3 and X5 series; the X4 needs a laser enclosure. Beyond that it suits most enclosed engravers.

What’s in the box?

The purifier, power cable, fitted filter pack, four spare pre-filters, a pipe adapter, two hose clamps, a screwdriver, the exhaust hose, two fitted fuses and a manual.