Flashforge Adventurer 5M High-Speed 3D Printer

An entry-level CoreXY printer that reaches 600 mm/s. A pressure sensor levels the bed in one click, nozzles swap in three seconds, and it prints a 220 mm cube.

~~$289~~

8%$265.88

Price with code · Geekbuying · as of 2026-10-09

Code CONSUM50 · 8% off

max $50 · until 2027-05-31

Copy code & shop Geekbuying

~~$289~~8%$265.88Copy code & shop Geekbuying

1CoreXY, up to 600 mm/s

Standard print speed is 300 mm/s, with up to 600 mm/s extrusion and 20,000 mm/s² acceleration. The nozzle flows 32 mm³/s and reaches 200 °C in 35 seconds.

2One-click auto levelling

A pressure sensor in the bed measures and works out the offset, so the first layer is right without tools or manual Z calibration. The flexible double-sided PEI sheet pops prints off easily.

3Three-second nozzle swap

Swap between 0.25, 0.4, 0.6 and 0.8 mm nozzles for detail or speed. Use 0.4 mm for PLA, PETG and TPU, and 0.6 mm for PLA-CF and PETG-CF.

Key specs

Build volume: 220 × 220 × 220 mm
Speed: 300 standard · 600 mm/s max
Nozzle temp: 280 °C
Connectivity: USB drive, Wi-Fi, Ethernet
Power input: AC 100–120 V, 60 Hz, 350 W
Ships from: US warehouse

Good pick if

It’s your first 3D printer
You’re in the US on 110 V

Think twice if

You’re on 220 V mains
You print ABS often and need an enclosure

FAQ

Is there a promo code?

Yes. Enter CONSUM50 at Geekbuying checkout when buying the Flashforge Adventurer 5M High-Speed 3D Printer for 8% off. Conditions: max $50 · until 2027-05-31.

Is it enclosed?

No, it’s open, so use it somewhere well ventilated. Dual-channel cooling keeps detail at high speed.

Which slicer does it use?

Flashforge’s FlashPrint 5, and it’s compatible with Prusa Slicer, Cura and Orca Slicer.