Creality Space Pi Filament Dryer

A dryer that keeps filament dry while you print. A 110 W PTC heater and fan circulate hot air 360° for even drying, and the 3.7-inch touchscreen has one-touch presets for 12 filament types.

~~$64.18~~

8%$59.05

Price with code · Geekbuying · as of 2026-10-09

Code CONSUM50 · 8% off

max $50 · until 2027-05-31

Copy code & shop Geekbuying

~~$64.18~~8%$59.05Copy code & shop Geekbuying

1Fewer moisture-related failures

Wet filament causes stringing, clogs, poor adhesion and layer shifts, worse at high speed. Drying it during the print reduces the effect of room humidity.

Recommended temperature and time per filament

212 presets, 45–70 °C

One touch sets any of 12 types, including composites like PLA-CF, PA-CF and ASA, or you can set 45–70 °C yourself. The screen shows live temperature and humidity and switches between °C and °F.

348-hour timer, power-loss memory

Set drying from 0 to 48 hours. After a power cut it remembers the previous material and temperature, so there’s nothing to reset.

Key specs

Rated power: 145 W (110 W PTC heater)
Temperature: 45–70 °C
Timer: 0–48 h
Filament diameter: 1.75 / 2.85 mm
Power input: 220 V 50/60 Hz
Ships from: Poland warehouse

Good pick if

You print somewhere humid
You use moisture-sensitive filaments like PA or PETG

Think twice if

You need to dry several spools at once

FAQ

Is there a promo code?

Yes. Enter CONSUM50 at Geekbuying checkout when buying the Creality Space Pi Filament Dryer for 8% off. Conditions: max $50 · until 2027-05-31.

Should I print right after drying?

In humid seasons, dry first and print as soon as you can. Since filament can feed straight from the dryer while printing, it has little chance to pick up moisture again.

What’s in the box?

The dryer box and a user manual.