BIQU Hurakan Klipper 3D Printer

A 220 × 220 × 270 mm 3D printer with Klipper preinstalled on a BTT Manta M4P board and CB1 core. Built-in Wi-Fi lets you run prints from the Mainsail web interface, and a 6 g MicroProbe levels the bed automatically. Marlin is supported too.

~~$368.76~~

8%$339.26

Price with code · Geekbuying · as of 2026-10-09

Code CONSUM50 · 8% off

max $50 · until 2027-05-31

Copy code & shop Geekbuying

~~$368.76~~8%$339.26Copy code & shop Geekbuying

1Klipper and Wi-Fi as standard

Print with Klipper firmware straight away, no complicated setup. On the same Wi-Fi network, the Mainsail interface starts, pauses and tracks prints and adjusts settings.

26 g probe, run-out sensor

BIQU’s own 6 g MicroProbe handles precise auto levelling and is rated for over 10 million uses. A run-out sensor pauses the print if filament ends or breaks, and TMC2209 drivers keep it quiet.

3Zoned bed, RGB light

One switch heats just the centre of the bed at 100 W or the whole bed at 240 W to save power. The 16.8-million-colour RGB light is set from the web interface or the display.

Key specs

Build volume: 220 × 220 × 270 mm
Max nozzle / bed: 260 °C / 100 °C
Top speed: 180 mm/s (60 mm/s suggested)
Power input: 100–120 V / 200–240 V AC · 280 W
Weight: 8.5 kg
Ships from: EU warehouse

Good pick if

You want Klipper without installing it yourself
You like managing prints from a web page

Think twice if

You need filaments that print above 260 °C

FAQ

Is there a promo code?

Yes. Enter CONSUM50 at Geekbuying checkout when buying the BIQU Hurakan Klipper 3D Printer for 8% off. Conditions: max $50 · until 2027-05-31.

Which filaments can it print?

PLA, ABS, PETG and any material that prints below 260 °C, including 95A flexible filament.

Which software does it use?

Slicers such as Cura, Repetier-Host and Simplify3D, with files sent by USB drive or LAN and Wi-Fi. A TF card with reader and 50 g of test filament are included.