ATOMSTACK A40 Pro V2 48W Laser Engraver

An open-frame laser with a physical switch between a 24 W engraving mode and a 48 W cutting mode. At 48 W it cuts 18 mm wood in a pass, with automatic air assist and one-click autofocus.

~~$999~~

5%$949

Price with code · Geekbuying · as of 2026-10-09

Code CONSUM50 · 8% off

max $50 · until 2027-05-31

Copy code & shop Geekbuying

~~$999~~5%$949Copy code & shop Geekbuying

1Two outputs, one button

The 24 W mode engraves finely with a 0.08 × 0.1 mm spot, and the 48 W mode cuts deep in one pass. A physical button swaps between them to suit the job.

18 mm wood and 0.1 mm stainless cut in one pass

218 mm wood in a pass

At 48 W it cuts 18 mm wood, 9 mm MDF and 0.1 mm stainless steel in a single pass. The working area is 395 × 385 mm, and it moves at up to 500 mm/s.

3Automatic air assist

An air pump is included, and automatic air assist that the software switches on and off blows smoke clear for cleaner cuts. There’s also one-click autofocus, a crosshair pointer and a magnetic protective cover.

Key specs

Laser: 40–48 W (455 nm)
Working area: 395 × 385 mm
Top speed: 500 mm/s
Power input: AC 100–240 V · 210 W
Weight: 15 kg
Ships from: US warehouse

Good pick if

You often cut thick wood
You make items to sell in a small workshop

Think twice if

An open frame without an enclosure worries you

FAQ

Is there a promo code?

Yes. Enter CONSUM50 at Geekbuying checkout when buying the ATOMSTACK A40 Pro V2 48W Laser Engraver for 8% off. Conditions: max $50 · until 2027-05-31.

Which software does it use?

LaserGRBL and LightBurn, connected over USB. It takes NC, BMP, JPG, PNG and DXF files.

What’s in the box?

The engraver frame, laser module, air pump, power cable and adapter, and a manual. Assembly usually takes 20–30 minutes.